JackJaw® Stake testers are tools based on the popular JackJaw® Tent Stake Puller that incorporate an electronic load cell that allows the operator to measure the actual force required to pull a stake from the ground. The tester allows quick and accurate measurement of the holding power of any stakes from ¾” to 1 ¼” diameter. (European 25mm to 35mm). These pullers/testers have a leverage of 16 to 1, allowing a 200 lb. operator to make accurate readings of up to 3200 lbs. of holding force, with very little effort. The complete tester weighs approximately 30 lbs., making it easy to move from stake to stake.

The JJ0313 for jobs that need Certified Load cell, sells for $2,750.00. This unit also records peak load, for ease of use.

Look at the website www.jackjaw.com for more details or call Bob Anderson at 937 609-8937, or email Bob@jackjaw.com

Copyright 2020.

Karen Anderson
Karen Anderson



Also in News & Events

Efficiently and Safely Remove Stakes with Stake Pullers: A Guide to Choosing the Right Tool for the Job
Efficiently and Safely Remove Stakes with Stake Pullers: A Guide to Choosing the Right Tool for the Job

May 16, 2023 2 min read 0 Comments

JackJaw® Extractors: The Ultimate Solution for Any Job
JackJaw® Extractors: The Ultimate Solution for Any Job

April 14, 2023 2 min read 0 Comments

Effortlessly Remove U-Channel Sign Posts with the JackJaw 300 Puller
Effortlessly Remove U-Channel Sign Posts with the JackJaw 300 Puller

March 15, 2023 2 min read 0 Comments